I got an issue with a local dmx setup: As soon as I plug in the DMX cable the cursor of the computer is going to move by itself and click randomly. Sometimes it doesn't happen after connecting the dmx cable. (Maybe related to the battery load?)
Has had somebody the same issue and was able to fix it?
The dmx signal feeds six small moving heads and one strobe.
I installed a DMX terminator 120ohm resistor
Node is an Enttec DMX Open
I tested two different computers:
Lenovo Thinkpad W530
It happens that the Lenovo works fine 8 of ten times, whereas the Chuwi works 1/10 times only.
The Chuwi tablet should control the system in future.
I ordered a Enttec Usb Pro
I will try a SACN unit
thanks a lot