It is possible to have several fixtures change value sequentially in a single cue.
To achieve this we make use of the Delay and a value fanning.
Example 10 fixtures goes from 0 to 100% on intensity. one after the other,
Select the fixtures (the selection order is important, it will dictate how the delay will be applied)
Expand the parameter window using the UP arrow on the lower right of the main window.
Select the intensity parameter group
Set the Intensity to 100%
Open the keypad using the keypad button
Press Delay then the Intensity parameter group or the bottom part of the parameter, the difference if if you want the delay to be on all parameters of a group or to a specific parameter
type 0 THRU 8 and press ENTER
the programmer will show this
Then record your cue
Try different variant
DELAY 8 THRU 0 ENTER
DELAY 0 THRU 8 THRU 0 ENTER
Set the Grouping Tool to Mirror by 2 and set the FAN ON
And apply the delay Intensity 0 THRU 8 ENTER